The PIX-LINK LV-WR02 v1 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the PIX-LINK 300Mbps 2.4G Wireless Range Extender.
PIX-LINK LV-WR02 v1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.254
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.254
How to factory reset (hard reset) PIX-LINK LV-WR02 v1 :
You can factory reset your PIX-LINK LV-WR02 v1 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
PIX-LINK LV-WR02 v1 router specifications :
System specs
CPU: 575 MHz
RAM: 8 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
1 x 100mbps port
USB-ports: 0
