How to factory reset Samsung CY-SWR1100 router – Default Login & Password

The Samsung CY-SWR1100 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.

Samsung CY-SWR1100 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
Default username: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) Samsung CY-SWR1100 :

You can factory reset your Samsung CY-SWR1100 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Samsung CY-SWR1100 router specifications :

System specs
CPU: 500 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
CY-SWR1100 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Samsung CY-SWR1100
Samsung stock firmware for the CY-SWR1100
Stock firmwares for the CY-SWR1100 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.