How to factory reset Seagate Personal Cloud 2-Bay router – Default Login & Password

The Seagate Personal Cloud 2-Bay router has No WiFi, Gigabit ETH-ports and 0 USB-ports.
It is also known as the Seagate Personal Cloud 2-Bay.

Seagate Personal Cloud 2-Bay default Password , Login & Gateway settings :

If you have performed a reset of your Personal Cloud 2-Bay device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Seagate Personal Cloud 2-Bay :

You can factory reset your Seagate Personal Cloud 2-Bay in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Seagate Personal Cloud 2-Bay router specifications :

System specs
CPU: 1.2 GHz
RAM: 512 MiB
Flash: 1 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
None
USB-ports: 0
Personal Cloud 2-Bay Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Seagate Personal Cloud 2-Bay
Seagate stock firmware for the Personal Cloud 2-Bay
Stock firmwares for the Personal Cloud 2-Bay are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.