The Securifi Almond (2012) router has 300mbps WiFi, 2 100mbps ETH-ports and 0 USB-ports.
Securifi Almond (2012) default Password , Login & Gateway settings :
Default Gateway IP: 10.10.10.254
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 10.10.10.254
How to factory reset (hard reset) Securifi Almond (2012) :
You can factory reset your Securifi Almond (2012) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Securifi Almond (2012) router specifications :
CPU: 384 MHz
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
2 x 100mbps ports
Securifi Almond review (quick overview)
Here is the quick comparison of how the Securifi Almond compares to
other routers on our site
For a full list of routers and how they compare to the Almond (2012), check the
Router Buying Guide which will help you buy the most
Almond (2012) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Securifi Almond (2012)
Securifi stock firmware for the Almond (2012)
Stock firmwares for the Almond (2012) are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.