How to factory reset StarTech PM1115UWGB router – Default Login & Password

The StarTech PM1115UWGB router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the StarTech Wireless N USB 2.0 Network print server.

StarTech PM1115UWGB default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.10
Default username: admin
Default password: none
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.10

How to factory reset (hard reset) StarTech PM1115UWGB :

You can factory reset your StarTech PM1115UWGB in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

StarTech PM1115UWGB router specifications :

System specs
CPU: n/a
RAM: 32 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0