How to factory reset Synology DiskStation DS412+ router – Default Login & Password

The Synology DiskStation DS412+ router has No WiFi, 2 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Synology 4-Bay Diskless Network Attached Storage (DS412+).
The DiskStation DS412+ is featured in our
Best Mid-end routers: buying guide
How to factory reset Synology DiskStation DS412+ - Default Login & Password

Synology DiskStation DS412+ default Password , Login & Gateway settings :

If you have performed a reset of your DiskStation DS412+ device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Synology DiskStation DS412+ :

You can factory reset your Synology DiskStation DS412+ in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Synology DiskStation DS412+ router specifications :

System specs
CPU: 2.13 GHz
RAM: 1024 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
2 x Gigabit ports
USB-ports: 0
Synology DiskStation review (quick overview)
Here is the quick comparison of how the Synology DiskStation compares to
other routers on our site
Average
53/100
Editor
76/100
WiFi
2/100
Hardware
83/100
Current price
$1234.33
For a full list of routers and how they compare to the DiskStation DS412+, check the
Router Buying Guide which will help you buy the most
price-competitive router.
DiskStation DS412+ Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Synology DiskStation DS412+
Synology stock firmware for the DiskStation DS412+
Stock firmwares for the DiskStation DS412+ are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.