How to factory reset Tenda Mesh3s router – Default Login & Password

The Tenda Mesh3s router has Gigabit WiFi, 1 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.

Tenda Mesh3s default Password , Login & Gateway settings :

If you have performed a reset of your Mesh3s device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Tenda Mesh3s :

You can factory reset your Tenda Mesh3s in the following way(s)
Through the web interface
Open your web browser and go to routers web interface (see default settings below)
Sign in with your username/password or check default settings below
Once logged in to the interface locate System tools and click it
Under System tools locate Restore to factory and click it
On the resulting page click the Restore button, click Ok if prompted
Wait for the reboot progress to finalize
With the reset button
Have the power plugged in and powered on
Locate the Reset/WPS button on your router
With a sharp object (e.g. paperclip) press and hold the button for 7 seconds
When the SYS light stops blinking, release the reset button.

Tenda Mesh3s router specifications :

System specs
CPU: 1 GHz
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1200 Mpbs
WAN
None
ETH
1 x 100mbps port
USB-ports: 0