How to factory reset Tenda PA7 router – Default Login & Password

The Tenda PA7 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 650 Mpbs.

Tenda PA7 default Password , Login & Gateway settings :

If you have performed a reset of your PA7 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): Tenda_XXXXXX,Tenda_XXXXXX_5G
Default password: admin
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Tenda PA7 :

You can factory reset your Tenda PA7 in the following way(s)
Through the web interface
Open your web browser and go to routers web interface (see default settings below)
Sign in with your username/password or check default settings below
Once logged in to the interface locate System tools and click it
Under System tools locate Restore to factory and click it
On the resulting page click the Restore button, click Ok if prompted
Wait for the reboot progress to finalize
With the reset button
Have the power plugged in and powered on
Locate the Reset/WPS button on your router
With a sharp object (e.g. paperclip) press and hold the button for 7 seconds
When the SYS light stops blinking, release the reset button.

Tenda PA7 router specifications :

System specs
CPU: 900 MHz
RAM: 128 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 650 Mpbs
WAN
None
ETH
1 x Gigabit port
USB-ports: 0