The TP-LINK Archer A10 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2300 Mpbs.
The Archer A10 is featured in our
Best Mid- to high-end routers: buying guide
TP-LINK Archer A10 default Password , Login & Gateway settings :
If you have performed a reset of your Archer A10 device or not changed the defaults, you
be able to access it with the following settings
Default Network name (SSID): TP-Link_XXXX,TP-Link_XXXX_5G
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) TP-LINK Archer A10 :
You can factory reset your TP-LINK Archer A10 in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TP-LINK Archer A10 router specifications :
CPU: 880 MHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: 2300 Mpbs
1 x Gigabit port
4 x Gigabit ports
TP-LINK Archer A10 review (quick overview)
Here is the quick comparison of how the TP-LINK Archer A10 compares to
other routers on our site
For a full list of routers and how they compare to the Archer A10, check the
Router Buying Guide which will help you buy the most