How to factory reset TP-LINK Archer C20 v1.x router – Default Login & Password

The TP-LINK Archer C20 v1.x router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AC750 Wireless Dual Band Router.
How to factory reset TP-LINK Archer C20 v1.x - Default Login & Password

TP-LINK Archer C20 v1.x default Password , Login & Gateway settings :

If you have performed a reset of your Archer C20 v1.x device or not changed the defaults, you
should
be able to access it with the following settings
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) TP-LINK Archer C20 v1.x :

You can factory reset your TP-LINK Archer C20 v1.x in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

TP-LINK Archer C20 v1.x router specifications :

System specs
CPU: 580 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
TP-LINK Archer C20 review (quick overview)
Here is the quick comparison of how the TP-LINK Archer C20 compares to
other routers on our site
Average
33/100
Editor
68/100
WiFi
20/100
Hardware
13/100
Current price
$39.99
For a full list of routers and how they compare to the Archer C20 v1.x, check the
Router Buying Guide which will help you buy the most
price-competitive router.
Archer C20 v1.x Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK Archer C20 v1.x
TP-LINK stock firmware for the Archer C20 v1.x
Stock firmwares for the Archer C20 v1.x are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.