The TP-LINK Archer C28HP router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports.
If you have performed a reset of your Archer C28HP device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): TP-LINK_XXXX,TP-LINK_XXXX_5G
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
You can factory reset your TP-LINK Archer C28HP in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
System specs
CPU: 750 MHz
RAM: 64 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
The Ruckus Wireless ZoneFlex 7762-S router has 300mbps WiFi, 2 Gigabit ETH-ports and 0 USB-ports.ZoneFlex…
The Samsung SCH-LC11 (Verizon) router has 54mbps WiFi, N/A ETH-ports and 0 USB-ports.Samsung SCH-LC11 (Verizon)…
The SAPIDO RB-1232 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.It is also…
The SFR Neufbox 6 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.SFR Neufbox…
The Sitecom WL-309 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.It is also…
The SkyLink SL-R7205 (XDX-RN502J) router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.SkyLink SL-R7205…