How to factory reset TP-LINK Archer C3200 router

The TP-LINK Archer C3200 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 3200 Mpbs.

TP-LINK Archer C3200 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) TP-LINK Archer C3200 :

You can factory reset your TP-LINK Archer C3200 in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

How to login to the TP-LINK Archer C3200 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

How to factory reset TP-LINK Archer C3200 router – Default Login & Password

TP-LINK Archer C3200 default Password , Login & Gateway settings :

How to factory reset (hard reset) TP-LINK Archer C3200 :

How to login to the TP-LINK Archer C3200 :

TP-LINK Archer C3200 router specifications :

TP Link