The TP-LINK CPE210 router has 300mbps WiFi, 2 100mbps ETH-ports and 0 USB-ports.
It is also known as the TP-LINK 2.4GHz 300Mbps 9dBi Outdoor CPE.
TP-LINK CPE210 default Password , Login & Gateway settings :
If you have performed a reset of your CPE210 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) TP-LINK CPE210 :
You can factory reset your TP-LINK CPE210 in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TP-LINK CPE210 router specifications :
System specs
CPU: 560 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
2 x 100mbps ports
USB-ports: 0
