TP-LINK EAP110-Outdoor v1.x default Password , Login & Gateway settings :
If you have performed a reset of your EAP110-Outdoor v1.x device or not changed the defaults, you
be able to access it with the following settings
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) TP-LINK EAP110-Outdoor v1.x :
You can factory reset your TP-LINK EAP110-Outdoor v1.x in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TP-LINK EAP110-Outdoor v1.x router specifications :
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
EAP110-Outdoor v1.x Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK EAP110-Outdoor v1.x
TP-LINK stock firmware for the EAP110-Outdoor v1.x
Stock firmwares for the EAP110-Outdoor v1.x are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.