The TP-LINK TL-WA801ND v4 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
TP-LINK TL-WA801ND v4 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.254
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.254
How to factory reset (hard reset) TP-LINK TL-WA801ND v4 :
You can factory reset your TP-LINK TL-WA801ND v4 in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
How to login to the TP-LINK TL-WA801ND v4 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
TP-LINK TL-WA801ND v4 router specifications :
CPU: 560 MHz
RAM: 32 MiB
Flash: 4 MiB
Custom firmwares: OpenWrt
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
TP-LINK TL-WA801ND review (quick overview)
Here is the quick comparison of how the TP-LINK TL-WA801ND compares to
other routers on our site
For a full list of routers and how they compare to the TL-WA801ND v4, check the
Router Buying Guide which will help you buy the most