The TP-LINK TL-WPA8630P router has Gigabit WiFi, 3 Gigabit ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AV1200 Gigabit Passthrough Powerline ac Wi-Fi.
TP-LINK TL-WPA8630P default Password , Login & Gateway settings :
Default Gateway IP: http://tplinkplc.net
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: http://tplinkplc.net
How to factory reset (hard reset) TP-LINK TL-WPA8630P :
You can factory reset your TP-LINK TL-WPA8630P in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
How to login to the TP-LINK TL-WPA8630P :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://tplinkplc.net
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
TP-LINK TL-WPA8630P router specifications :
System specs
CPU: n/a
RAM: 128 MiB + 128 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
3 x Gigabit ports
USB-ports: 0
TL-WPA8630P Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK TL-WPA8630P
TP-LINK stock firmware for the TL-WPA8630P
Stock firmwares for the TL-WPA8630P are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
