How to factory reset TP-LINK TL-WPA9610 v1.x router – Default Login & Password

The TP-LINK TL-WPA9610 v1.x router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
It is also known as the TP-LINK AV2000 Gigabit Powerline AC1200 Wi-Fi Adapter.
How to factory reset TP-LINK TL-WPA9610 v1.x - Default Login & Password

TP-LINK TL-WPA9610 v1.x default Password , Login & Gateway settings :

If you have performed a reset of your TL-WPA9610 v1.x device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): TP-LINK_XXXX,TP-LINK_XXXX_5G
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) TP-LINK TL-WPA9610 v1.x :

You can factory reset your TP-LINK TL-WPA9610 v1.x in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

TP-LINK TL-WPA9610 v1.x router specifications :

System specs
CPU: 900 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: 1200 Mpbs
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
TL-WPA9610 v1.x Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK TL-WPA9610 v1.x
TP-LINK stock firmware for the TL-WPA9610 v1.x
Stock firmwares for the TL-WPA9610 v1.x are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.