The TP-LINK TL-WR902AC v1.x router has Gigabit WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AC750 Wireless Travel Router. It also supports custom firmwares like: LEDE Project
TP-LINK TL-WR902AC v1.x default Password , Login & Gateway settings :
If you have performed a reset of your TL-WR902AC v1.x device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) TP-LINK TL-WR902AC v1.x :
You can factory reset your TP-LINK TL-WR902AC v1.x in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TP-LINK TL-WR902AC v1.x router specifications :
System specs
CPU: 560 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: LEDE Project
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
TP-LINK TL-WR902AC review (quick overview)
Here is the quick comparison of how the TP-LINK TL-WR902AC compares to
other routers on our site
Average
33/100
Editor
68/100
WiFi
20/100
Hardware
13/100
Current price
$39.99
For a full list of routers and how they compare to the TL-WR902AC v1.x, check the
Router Buying Guide which will help you buy the most
price-competitive router.
TL-WR902AC v1.x Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK TL-WR902AC v1.x
Flashing LEDE Project on the TL-WR902AC v1.x
The TP-LINK TL-WR902AC v1.x is also supported by the LEDE Project.
To install LEDE aquire the correct firmware from their
Firmware downloads page and
then follow the instructions on their
Quick Start Guide
Note: Make sure to read the LEDE wikis carefully before flashing.
