How to factory reset TRENDnet TEW-818DRU V1.0R router – Default Login & Password

The TRENDnet TEW-818DRU V1.0R router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the TRENDnet AC1900 Dual Band Wireless Router.

TRENDnet TEW-818DRU V1.0R default Password , Login & Gateway settings :

If you have performed a reset of your TEW-818DRU V1.0R device or not changed the defaults, you
should
be able to access it with the following settings
Default username: admin
Default password: ”randomly generated’
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) TRENDnet TEW-818DRU V1.0R :

You can factory reset your TRENDnet TEW-818DRU V1.0R in the following way(s)
With the reset button
Have the unit plugged in and powered on
Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
Wait for the router to reboot

TRENDnet TEW-818DRU V1.0R router specifications :

System specs
CPU: 800 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x N/A port
ETH
4 x N/A ports
USB-ports: 0
TEW-818DRU V1.0R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-818DRU V1.0R
Flashing OpenWrt on the TRENDnet TEW-818DRU V1.0R
The TRENDnet TEW-818DRU V1.0R is supported by OpenWrt according to their Table of
Hardware. So
flashing OpenWrt onto it should be quite straigthforward.
We couldn’t find any specific instructions for flashin OpenWrt on the TRENDnet
TEW-818DRU V1.0R, but since it’s listed in their Table of Hardware as supported, you can
head
over to the
OpenWrt install instructions and read on there.
Note: Flashing custom firmwares is always on you’re on own risk. Make sure to
read OpenWrt’s wikis to understand the risks and how to proceed if something goes
wrong.
TRENDnet stock firmware for the TEW-818DRU V1.0R
Stock firmwares for the TEW-818DRU V1.0R are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.