The Belkin F5D8233-4 v1 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the Belkin N Wireless Router.
Belkin F5D8233-4 v1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.2.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.2.1
How to factory reset (hard reset) Belkin F5D8233-4 v1 :
You can factory reset your Belkin F5D8233-4 v1 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Belkin F5D8233-4 v1 router specifications :
CPU: 333 MHz
RAM: 16 MiB
Flash: 2 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
F5D8233-4 v1 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F5D8233-4 v1
Belkin stock firmware for the F5D8233-4 v1
Stock firmwares for the F5D8233-4 v1 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.