The Belkin F9K1108 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Belkin F9K1108 default Password , Login & Gateway settings :
If you have performed a reset of your F9K1108 device or not changed the defaults, you
be able to access it with the following settings
Default Network name (SSID): belkin.XXX
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Belkin F9K1108 :
You can factory reset your Belkin F9K1108 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Belkin F9K1108 router specifications :
RAM: 64 MiB
Custom firmwares: None
WiFi: 300mbps (abgn)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F9K1108
Belkin stock firmware for the F9K1108
Stock firmwares for the F9K1108 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.