How to factory reset Belkin F9K1124 v1 router – Default Login & Password

The Belkin F9K1124 v1 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1900 Mpbs.
It is also known as the Belkin AC1900 Wi-Fi Dual-Band AC+ Gigabit Router.
How to factory reset Belkin F9K1124 v1 - Default Login & Password

Belkin F9K1124 v1 default Password , Login & Gateway settings :

Default Gateway IP: http://192.168.2.1
Default subnet mask: 255.255.255.0
Default DNS server: http://192.168.2.1

How to factory reset (hard reset) Belkin F9K1124 v1 :

You can factory reset your Belkin F9K1124 v1 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Belkin F9K1124 v1 router specifications :

System specs
CPU: 1 GHz
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1900 Mpbs
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
F9K1124 v1 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F9K1124 v1
Belkin stock firmware for the F9K1124 v1
Stock firmwares for the F9K1124 v1 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.