How to factory reset D-Link DAP-2330 rev A1 router – Default Login & Password

The D-Link DAP-2330 rev A1 router has 300mbps WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
How to factory reset D-Link DAP-2330 rev A1 - Default Login & Password

D-Link DAP-2330 rev A1 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.50
D-Link login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.50

How to factory reset (hard reset) D-Link DAP-2330 rev A1 :

You can factory reset your D-Link DAP-2330 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DAP-2330 rev A1 router specifications :

System specs
CPU: n/a
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
D-Link DAP-2330 review (quick overview)
Here is the quick comparison of how the D-Link DAP-2330 compares to
other routers on our site
Average
31/100
Editor
84/100
WiFi
6/100
Hardware
5/100
Current price
$169.99
For a full list of routers and how they compare to the DAP-2330 rev A1, check the
Router Buying Guide which will help you buy the most
price-competitive router.

D-Link