How to factory reset D-Link DVG-G5402SP router – Default Login & Password

The D-Link DVG-G5402SP router has 54mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the D-Link VoIP Wireless Router.
How to factory reset D-Link DVG-G5402SP - Default Login & Password

D-Link DVG-G5402SP default Password , Login & Gateway settings :

Default Gateway IP: 192.168.8.254
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.8.254

How to factory reset (hard reset) D-Link DVG-G5402SP :

You can factory reset your D-Link DVG-G5402SP in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

How to login to the D-Link DVG-G5402SP :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.8.254
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

D-Link DVG-G5402SP router specifications :

System specs
CPU: n/a
RAM: 16 MiB
Flash: 4 MiB
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0