How to factory reset D-Link DWR-961 rev C1 router

The D-Link DWR-961 rev C1 router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
It is also known as the D-Link Wireless AC1200 4G LTE Router.

D-Link DWR-961 rev C1 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) D-Link DWR-961 rev C1 :

You can factory reset your D-Link DWR-961 rev C1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

How to login to the D-Link DWR-961 rev C1 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

How to factory reset D-Link DWR-961 rev C1 router – Default Login & Password

D-Link DWR-961 rev C1 default Password , Login & Gateway settings :

How to factory reset (hard reset) D-Link DWR-961 rev C1 :

How to login to the D-Link DWR-961 rev C1 :

D-Link DWR-961 rev C1 router specifications :

D-Link