The Devolo WiFi pro 1200e router has Gigabit WiFi, 2 Gigabit ETH-ports and 0 USB-ports.
Devolo WiFi pro 1200e default Password , Login & Gateway settings :
Default Gateway IP: acquired via DHCP
Default subnet mask: 255.255.255.0
Default DNS server: acquired via DHCP
How to factory reset (hard reset) Devolo WiFi pro 1200e :
You can factory reset your Devolo WiFi pro 1200e in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Devolo WiFi pro 1200e router specifications :
System specs
CPU: n/a
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
2 x Gigabit ports
USB-ports: 0
WiFi pro 1200e Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Devolo WiFi pro 1200e
Devolo stock firmware for the WiFi pro 1200e
Stock firmwares for the WiFi pro 1200e are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
