The Motorola MX1200 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
It is also known as the Motorola AC1200 Dual Band WiFi Range Extender.
Motorola MX1200 default Password , Login & Gateway settings :
If you have performed a reset of your MX1200 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): MOTO-EXT
Default password: motorola
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Motorola MX1200 :
You can factory reset your Motorola MX1200 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Motorola MX1200 router specifications :
System specs
CPU: 580 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1200 Mpbs
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
MX1200 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Motorola MX1200
Motorola stock firmware for the MX1200
Stock firmwares for the MX1200 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
