How to factory reset NXP MCIMX8M-EVK router – Default Login & Password

The NXP MCIMX8M-EVK router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
How to factory reset NXP MCIMX8M-EVK - Default Login & Password

NXP MCIMX8M-EVK default Password , Login & Gateway settings :

If you have performed a reset of your MCIMX8M-EVK device or not changed the defaults, you
be able to access it with the following settings
Default subnet mask:

How to factory reset (hard reset) NXP MCIMX8M-EVK :

You can factory reset your NXP MCIMX8M-EVK in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

NXP MCIMX8M-EVK router specifications :

System specs
CPU: 1.5 GHz + 266 MHz
RAM: 3072 MiB
Flash: 16384 MiB + 32 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
USB-ports: 0
MCIMX8M-EVK Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the NXP MCIMX8M-EVK
NXP stock firmware for the MCIMX8M-EVK
Stock firmwares for the MCIMX8M-EVK are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.