The Technicolor TC8305C router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
TC8305C default Password , Login & Gateway settings :
Default Gateway IP: 10.0.0.1
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 10.0.0.1
How to factory reset (hard reset) TC8305C :
You can factory reset your Technicolor TC8305C in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
TC8305C router specifications :
RAM: 128 MiB
Flash: 64 MiB + 1 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
4 x Gigabit ports
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Technicolor TC8305C
Technicolor stock firmware for the TC8305C
Stock firmwares for the TC8305C are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.