How to factory reset TP-LINK Deco E4R router – Default Login & Password

The TP-LINK Deco E4R router has Gigabit WiFi, 1 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1300 Mpbs.
It is also known as the TP-LINK AC1200 Whole Home Mesh Wi-Fi System.
How to factory reset TP-LINK Deco E4R - Default Login & Password

TP-LINK Deco E4R default Password , Login & Gateway settings :

If you have performed a reset of your Deco E4R device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): Deco_XXXX
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) TP-LINK Deco E4R :

You can factory reset your TP-LINK Deco E4R in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

TP-LINK Deco E4R router specifications :

System specs
CPU: 750 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1300 Mpbs
WAN
1 x 100mbps port
ETH
1 x 100mbps port
USB-ports: 0
Deco E4R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK Deco E4R
TP-LINK stock firmware for the Deco E4R
Stock firmwares for the Deco E4R are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.

TP Link