How to factory reset TP-LINK RE210 router – Default Login & Password

The TP-LINK RE210 router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the TP-LINK AC750 Wireless Range Extender.
How to factory reset TP-LINK RE210 - Default Login & Password

TP-LINK RE210 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) TP-LINK RE210 :

You can factory reset your TP-LINK RE210 in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

How to login to the TP-LINK RE210 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

TP-LINK RE210 router specifications :

System specs
CPU: 580 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x N/A port
USB-ports: 0

TP Link