The TP-LINK RE350K router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
TP-LINK RE350K default Password , Login & Gateway settings :
If you have performed a reset of your RE350K device or not changed the defaults, you
be able to access it with the following settings
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) TP-LINK RE350K :
You can factory reset your TP-LINK RE350K in the following way(s)
Through the web interface
Open a browser and navigate to the web interface of the router (see default settings below)
In the menu look for System tools and under there find the Factory defaults option
On the Factory defaults page click on the Restore button to perform the reset.
With the RESET/WPS button
Have the unit powered on
Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
When the SYS led start blinking quickly release the reset button and wait for router to boot back up.
TP-LINK RE350K router specifications :
CPU: 720 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: 1200 Mpbs
1 x Gigabit port
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TP-LINK RE350K
TP-LINK stock firmware for the RE350K
Stock firmwares for the RE350K are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.