The Amped Wireless ALLY-R1900 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1900 Mpbs.
It is also known as the Amped Wireless ALLY Whole Home Smart Wi-Fi Router.
ALLY-R1900 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.3.1
Amped Wireless login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.3.1
How to factory reset (hard reset) ALLY-R1900 :
You can factory reset your Amped Wireless ALLY-R1900 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
ALLY-R1900 router specifications :
System specs
CPU: 880 MHz
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1900 Mpbs
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
Amped Wireless ALLY-R1900 review (quick overview)
Here is the quick comparison of how the Amped Wireless ALLY-R1900 compares to
other routers on our site
Average
41/100
Editor
50/100
WiFi
38/100
Hardware
35/100
Current price
$25.95
For a full list of routers and how they compare to the ALLY-R1900, check the
Router Buying Guide which will help you buy the most
price-competitive router.
ALLY-R1900 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Amped Wireless ALLY-R1900
Amped Wireless stock firmware for the ALLY-R1900
Stock firmwares for the ALLY-R1900 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
