The Arris SBG6950-AC2 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1900 Mpbs.
It is also known as the Arris SURFboard Cable Modem and Wi-Fi Router with ARRIS Secure Home Internet by McAfee.
Arris SBG6950-AC2 default Password , Login & Gateway settings :
If you have performed a reset of your SBG6950-AC2 device or not changed the defaults, you
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Arris SBG6950-AC2 :
You can factory reset your Arris SBG6950-AC2 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Arris SBG6950-AC2 router specifications :
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: 1900 Mpbs
4 x Gigabit ports
Arris SBG6950 review (quick overview)
Here is the quick comparison of how the Arris SBG6950 compares to
other routers on our site
For a full list of routers and how they compare to the SBG6950-AC2, check the
Router Buying Guide which will help you buy the most
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Arris SBG6950-AC2
Arris stock firmware for the SBG6950-AC2
Stock firmwares for the SBG6950-AC2 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.