How to factory reset AVM FRITZ!Box Fon WLAN 7360 v1 router – Default Login & Password

The AVM FRITZ!Box Fon WLAN 7360 v1 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
How to factory reset AVM FRITZ!Box Fon WLAN 7360 v1 - Default Login & Password

AVM FRITZ!Box Fon WLAN 7360 v1 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.178.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.178.1

How to factory reset (hard reset) AVM FRITZ!Box Fon WLAN 7360 v1 :

You can factory reset your AVM FRITZ!Box Fon WLAN 7360 v1 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

AVM FRITZ!Box Fon WLAN 7360 v1 router specifications :

System specs
CPU: 500 MHz
RAM: 128 MiB
Flash: 32 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
4 x Gigabit ports
USB-ports: 0
FRITZ!Box Fon WLAN 7360 v1 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the AVM FRITZ!Box Fon WLAN 7360 v1
Flashing OpenWrt on the AVM FRITZ!Box Fon WLAN 7360 v1
The AVM FRITZ!Box Fon WLAN 7360 v1 is supported by OpenWrt according to their Table of
Hardware. So
flashing OpenWrt onto it should be quite straigthforward.
We couldn’t find any specific instructions for flashin OpenWrt on the AVM
FRITZ!Box Fon WLAN 7360 v1, but since it’s listed in their Table of Hardware as supported, you can
head
over to the
OpenWrt install instructions and read on there.
Note: Flashing custom firmwares is always on you’re on own risk. Make sure to
read OpenWrt’s wikis to understand the risks and how to proceed if something goes
wrong.
AVM stock firmware for the FRITZ!Box Fon WLAN 7360 v1
Stock firmwares for the FRITZ!Box Fon WLAN 7360 v1 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.