The BT YouView Mini Box router has No WiFi, 1 100mbps ETH-ports and 0 USB-ports.
BT YouView Mini Box default Password , Login & Gateway settings :
If you have performed a reset of your YouView Mini Box device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) BT YouView Mini Box :
You can factory reset your BT YouView Mini Box in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
BT YouView Mini Box router specifications :
System specs
CPU: n/a
RAM: 2048 MiB
Flash: 4096 MiB + 4 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
YouView Mini Box Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the BT YouView Mini Box
BT stock firmware for the YouView Mini Box
Stock firmwares for the YouView Mini Box are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
