The Buffalo WLAR-L11-L router has 11mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Buffalo WLAR-L11-L default Password , Login & Gateway settings :
If you have performed a reset of your WLAR-L11-L device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): AXXXXXGROUP
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Buffalo WLAR-L11-L :
You can factory reset your Buffalo WLAR-L11-L in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Buffalo WLAR-L11-L router specifications :
System specs
CPU: n/a
RAM: 4 MiB
Flash: 1 MiB
Custom firmwares: None
Connectivity
WiFi: 11mbps (b)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
