How to factory reset D-Link DAP-2610 rev A1 router – Default Login & Password

The D-Link DAP-2610 rev A1 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
The DAP-2610 rev A1 is featured in our
Best Low-end routers: buying guide
How to factory reset D-Link DAP-2610 rev A1 - Default Login & Password

D-Link DAP-2610 rev A1 default Password , Login & Gateway settings :

If you have performed a reset of your DAP-2610 rev A1 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) D-Link DAP-2610 rev A1 :

You can factory reset your D-Link DAP-2610 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DAP-2610 rev A1 router specifications :

System specs
CPU: 717 MHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
D-Link DAP-2610 review (quick overview)
Here is the quick comparison of how the D-Link DAP-2610 compares to
other routers on our site
Average
47/100
Editor
84/100
WiFi
20/100
Hardware
37/100
Current price
$113.99
For a full list of routers and how they compare to the DAP-2610 rev A1, check the
Router Buying Guide which will help you buy the most
price-competitive router.

D-Link