The D-Link DAP-2660 rev A1 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the D-Link Wireless AC1200 Concurrent Dual Band PoE Access Point.
D-Link DAP-2660 rev A1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.50
D-Link login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.50
How to factory reset (hard reset) D-Link DAP-2660 rev A1 :
You can factory reset your D-Link DAP-2660 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DAP-2660 rev A1 router specifications :
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
D-Link DAP-2660 review (quick overview)
Here is the quick comparison of how the D-Link DAP-2660 compares to
other routers on our site
For a full list of routers and how they compare to the DAP-2660 rev A1, check the
Router Buying Guide which will help you buy the most