The D-Link DIR-822 rev D1 router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports.
D-Link DIR-822 rev D1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) D-Link DIR-822 rev D1 :
You can factory reset your D-Link DIR-822 rev D1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
How to login to the D-Link DIR-822 rev D1 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
D-Link DIR-822 rev D1 router specifications :
System specs
CPU: 1 GHz
RAM: 64 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
D-Link DIR-822 review (quick overview)
Here is the quick comparison of how the D-Link DIR-822 compares to
other routers on our site
Average
38/100
Editor
76/100
WiFi
20/100
Hardware
19/100
Current price
$21.99
For a full list of routers and how they compare to the DIR-822 rev D1, check the
Router Buying Guide which will help you buy the most
price-competitive router.
