The Linksys EA5800 router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1000 Mpbs.
It is also known as the Linksys AC1000 Dual-Band WiFi Router.
Linksys EA5800 default Password , Login & Gateway settings :
If you have performed a reset of your EA5800 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): LinksysXXXXX
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Linksys EA5800 :
You can factory reset your Linksys EA5800 in the following way(s)
Through the web interface
Open your browser and navigate to the router interface (see default settings below)
Under the Administration tab you will find a sub-tab called Factory defaults
On the Factory defaults page click the button labeled Restore Factory Defaults
With the reset button
Have your unit powered on
Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
When the power light goes solid, unplug the power to the router for 10 seconds
Plug the power back in and start the router
When the power light goes solid again the router is ready to use.
Linksys EA5800 router specifications :
System specs
CPU: n/a
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1000 Mpbs
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
Linksys EA5800 review (quick overview)
Here is the quick comparison of how the Linksys EA5800 compares to
other routers on our site
Average
42/100
Editor
86/100
WiFi
20/100
Hardware
21/100
Current price
$17.98
For a full list of routers and how they compare to the EA5800, check the
Router Buying Guide which will help you buy the most
price-competitive router.
EA5800 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Linksys EA5800
Linksys stock firmware for the EA5800
Stock firmwares for the EA5800 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
