The Logitech Harmony Link router has 54mbps WiFi, N/A ETH-ports and 0 USB-ports.
Logitech Harmony Link default Password , Login & Gateway settings :
If you have performed a reset of your Harmony Link device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Logitech Harmony Link :
You can factory reset your Logitech Harmony Link in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Logitech Harmony Link router specifications :
System specs
CPU: n/a
RAM: 64 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
None
USB-ports: 0
Harmony Link Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Logitech Harmony Link
Logitech stock firmware for the Harmony Link
Stock firmwares for the Harmony Link are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
