The Ubiquiti Networks NanoStation Loco M2 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
NanoStation Loco M2 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.20
Ubiquiti Networks login instructions
Default username: ubnt
Ubiquiti Networks router default password list
Default password: ubnt
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.20
How to factory reset (hard reset) NanoStation Loco M2 :
You can factory reset your Ubiquiti Networks NanoStation Loco M2 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
NanoStation Loco M2 router specifications :
System specs
CPU: 400 MHz
RAM: 32 MiB
Flash: 8 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
