The NEC BL1000HW router has Gigabit WiFi, 3 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 6000 Mpbs.
It is also known as the NEC AX3600 802.11ax WiFi Router.
NEC BL1000HW default Password , Login & Gateway settings :
If you have performed a reset of your BL1000HW device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) NEC BL1000HW :
You can factory reset your NEC BL1000HW in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
NEC BL1000HW router specifications :
System specs
CPU: 2.0 GHz
RAM: 512 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac+ax)
WiFi bands
n/a
WiFi throughput: 6000 Mpbs
WAN
2 x 10mbps ports
ETH
3 x N/A ports
USB-ports: 0
BL1000HW Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the NEC BL1000HW
NEC stock firmware for the BL1000HW
Stock firmwares for the BL1000HW are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
