How to factory reset Netgear EX6200v2 router – Default Login & Password

The Netgear EX6200v2 router has Gigabit WiFi, 5 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Netgear AC1200 Dual Band WiFi Range Extender.
How to factory reset Netgear EX6200v2 - Default Login & Password

Netgear EX6200v2 default Password , Login & Gateway settings :

If you have performed a reset of your EX6200v2 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Netgear EX6200v2 :

You can factory reset your Netgear EX6200v2 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.

Netgear EX6200v2 router specifications :

System specs
CPU: 710 MHz
RAM: 256 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
5 x Gigabit ports
USB-ports: 0
Netgear EX6200 review (quick overview)
Here is the quick comparison of how the Netgear EX6200 compares to
other routers on our site
Average
39/100
Editor
76/100
WiFi
20/100
Hardware
23/100
Current price
$47.29
For a full list of routers and how they compare to the EX6200v2, check the
Router Buying Guide which will help you buy the most
price-competitive router.
EX6200v2 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear EX6200v2
Netgear stock firmware for the EX6200v2
Stock firmwares for the EX6200v2 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.