The Plume SuperPod (B1A) router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
Plume SuperPod (B1A) default Password , Login & Gateway settings :
If you have performed a reset of your SuperPod (B1A) device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Plume SuperPod (B1A) :
You can factory reset your Plume SuperPod (B1A) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Plume SuperPod (B1A) router specifications :
System specs
CPU: 716 MHz
RAM: 512 MiB
Flash: 256 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
1 x Gigabit port
USB-ports: 0
SuperPod (B1A) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Plume SuperPod (B1A)
Plume stock firmware for the SuperPod (B1A)
Stock firmwares for the SuperPod (B1A) are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
