The Amped Wireless REC44M router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2600 Mpbs.
It is also known as the Amped Wireless High Power Plug-In AC2600 Wi-Fi Range Extender with MU-MIMO.
REC44M default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.240
Amped Wireless login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.240
How to factory reset (hard reset) REC44M :
You can factory reset your Amped Wireless REC44M in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
REC44M router specifications :
System specs
CPU: 880 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 2600 Mpbs
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
REC44M Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Amped Wireless REC44M
Amped Wireless stock firmware for the REC44M
Stock firmwares for the REC44M are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
