The Salt Fiber Box router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 3100 Mpbs.
Salt Fiber Box default Password , Login & Gateway settings :
If you have performed a reset of your Fiber Box device or not changed the defaults, you
be able to access it with the following settings
Default Network name (SSID): Salt_2GHz_XXXXXX,Salt_5GHz_XXXXXX
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Salt Fiber Box :
You can factory reset your Salt Fiber Box in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Salt Fiber Box router specifications :
CPU: 1.5 GHz
RAM: 512 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
WiFi throughput: 3100 Mpbs
1 x Gigabit port
4 x Gigabit ports
Fiber Box Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Salt Fiber Box
Salt stock firmware for the Fiber Box
Stock firmwares for the Fiber Box are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.