How to factory reset Arris SBG10 router – Default Login & Password

The Arris SBG10 router has Gigabit WiFi, 2 Gigabit ETH-ports and 0 USB-ports.
The SBG10 is featured in our
Best Low-end routers: buying guide
How to factory reset Arris SBG10 - Default Login & Password

Arris SBG10 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) Arris SBG10 :

You can factory reset your Arris SBG10 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Arris SBG10 router specifications :

System specs
CPU: 600 MHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
2 x Gigabit ports
USB-ports: 0
Arris SBG10 review (quick overview)
Here is the quick comparison of how the Arris SBG10 compares to
other routers on our site
Average
46/100
Editor
84/100
WiFi
20/100
Hardware
35/100
Current price
$50.29
For a full list of routers and how they compare to the SBG10, check the
Router Buying Guide which will help you buy the most
price-competitive router.
SBG10 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Arris SBG10
Arris stock firmware for the SBG10
Stock firmwares for the SBG10 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.