The Arris SBR-AC1900P router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1900 Mpbs.
It is also known as the Arris AC1900 SURFboard Wi-Fi Router.
Arris SBR-AC1900P default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) Arris SBR-AC1900P :
You can factory reset your Arris SBR-AC1900P in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Arris SBR-AC1900P router specifications :
CPU: 1 GHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: 1900 Mpbs
1 x Gigabit port
4 x Gigabit ports
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Arris SBR-AC1900P
Arris stock firmware for the SBR-AC1900P
Stock firmwares for the SBR-AC1900P are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.